It was just after 4:45 AM on Sunday (December 23) when Engine 75 arrived at the scene near 117th and LaSalle Streets. They quickly reported a fire breaking out in a two-and-a-half story wooden building. Shortly thereafter, Battalion 22 requested a formal fire alarm and mentioned that flames had spread to two structures. As firefighters from Engine 75 began their efforts, they encountered significant fire in the attic of the wooden building. Despite the challenge, the team managed to force their way inside and successfully extinguished the blaze in the attic before it could escalate further.
This firefighting operation was nothing short of impressive. The initial response was swift, and the firefighters' determination ensured that the fire didn’t spread to adjacent properties or cause more extensive damage. Their teamwork and expertise were evident in how they systematically tackled the situation.
Attached are several images captured by Eric Haak, providing a glimpse into the intense yet controlled environment of the incident. In one image, you can see the aftermath of the fire with remnants of smoke still lingering around the property. Another photo shows firefighters actively working on the roof, highlighting their strategic approach to containing the fire. A third image captures Engine 62 on standby, ready to assist if needed. The final two photos depict the meticulous overhaul process where firefighters carefully inspected the attic to ensure all embers were completely extinguished, preventing any risk of rekindling.
These images not only document the severity of the fire but also showcase the dedication and professionalism of the Chicago Fire Department. Their ability to manage such incidents efficiently is a testament to their training and commitment to public safety.
The collaborative effort among different units and the precision of each step taken during this operation speak volumes about the department’s capabilities. It’s a reminder of why communities trust their local firefighters to protect them in times of crisis.
Hollow Anchor Rod
Hollow anchor bar means a rod that transfers the structures or geotechnical load to a stable rock formations, anchor bolt consists of rod, drill bit, coupling, plate, grouting stopper and nut. Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It`s irreplaceable in narrow construction environment. Hollow anchor bar is made of seamless tube with high strength.
Hollow design, implement the grouting tube function, avoid the mortar loss when the traditional grouting tube pulled out.Grouting full, and can achieve the pressure grouting to improve project quality.
Center is good, mortor can wrap the bolt body together, so that it can avoid corrosion to achibe along term supporting purposes.
Easy installation, without onsite processing of threads. It can be easily installed an plate, nut.
It may bodies drilling, grouting and anchoring as a whole.
It has a wide specifications. Diameter:25-130mm.
Quality and easy construction, high efficiency.
Used invious surrounding rocks.
Hollow Anchor Bar,Grouting Anchor Rod
SHANDONG HUITONG STEEL CO.,LTD , https://www.cnhuitongsteel.com