Model NO.: MiniC/T180
Origin: China
Temperature and Humidity Test Chamber
Product Features
The Climate Mini series is designed with excellent engineering and high-quality materials. It features a full heating observation window for easy monitoring of the test process.
There are lead holes on both sides for convenient cable management. The chamber includes triple independent over-temperature protection systems for enhanced safety.
High-quality casters allow for easy movement of the unit. The operation panel is designed to be easily disassembled for maintenance purposes.
It comes with a high-stability full-color touch screen for intuitive control. The sample holder is height-adjustable to accommodate different testing needs.
The device also includes a safety sample terminal and a super quiet operation mode for a better user experience.
Available in vertical or horizontal configurations, it meets various application requirements.
Application Scope
This equipment simulates combined climate conditions such as high and low temperature operations, temperature cycling, high humidity, low humidity, and condensation tests. It helps evaluate how well a product adapts under these environmental stresses.
It complies with international standards like IEC, JIS, GB, MIL, etc., ensuring consistency in global testing procedures.
Key Characteristics
Inner Chamber: Double-sided galvanized sheet with an anti-static surface.
Outer Chamber: Made from stainless steel 304.
Insulation: Polyurethane and fiberglass for superior thermal performance.
Seal: High-purity silicon rubber (Toshiba) for long-lasting durability.
Heater: Nickel-chromium alloy for efficient heating.
Humidifier (C): Outer tube made of seamless stainless steel SUS316; internal heating wire is nickel-chromium alloy.
Sample Holder: Standard configuration is 10kg per floor, with options of 20kg or 30kg per floor. Total capacity up to 60kg (optional).
Refrigeration Design
Modular design ensures reliability and ease of maintenance. Silver brazing rods with 45% silver content are used in welding to prevent leaks.
Ample space allows for smooth operation. Nitrogen gas is used during welding to avoid oxidation inside the tubes.
Multiple shock absorption processes and rust prevention techniques are applied for enhanced durability.
Compressor
Tecumseh Compressor (France, original imported)
Danfoss Compressor (Denmark, original imported)
Pressure Relay
American Emerson or Danish Danfoss
Evaporator
Custom-made high-efficiency fin heat exchanger.
Solenoid Valve
Castel (Italy)
Refrigerant (HFC Environmental Refrigerant)
R404a
R23 (-70)
Danish Danfoss Brand
Condenser
Condensation Evaporator (-70)
Evaporation Pressure Regulator (C)
Thermal Expansion Valve
Dry Filter
Condensation Pressure Regulator (W)
Control System
Controller
·5.7-inch TFT color LCD display with 640x480 resolution
·1200 programmable cycles, recyclable
·RS-485 port for remote communication
·SD card storage for data recording up to 7500 days (sample every 5 minutes)
·Supports Chinese or English language
Recorder
·Large LED display for clear readings
·High reliability suitable for industrial use
Sample Power Control Terminal
·Controls power supply to the sample when the safety protection system activates.
Safety Protection Devices
·Compressor Protection:
A. Over-voltage protection
B. Motor overheating protection
C. Motor overload (A)
D. Condenser fan motor overheating (W)
·Waterway (C)
A. Dry burning of heating pipe
B. Abnormal water supply
C. Abnormal water drainage
·Test Sample Protection
A. Adjustable overtemperature protection
B. Air conditioning channel limit overtemperature
C. Overtemperature alarm stop
D. Sample terminal protection
·Electrical Control
A. Fan motor overheating
B. Main power phase sequence protection
C. Electric leakage protection
D. Short circuit protection
Technical Specifications of Mini Series Products
Main Technical Parameters
Temperature Fluctuation: ≤±0.5°C
Temperature Uniformity: ≤2.0°C
Temperature Deviation: ≤±2.0°C
Humidity Range: 20-98% RH (C)
Humidity Deviation: ≤±3.0%RH (>75%RH)
≤±5.0%RH (<75%RH) (C)
Thermostat and Humidity Control Method: BTHC balanced thermostat and humidity control method (C)
Ambient Temperature: +5°C~+35°C
Power Supply (V): AC 380±10% V, 50Hz±0.5Hz
Equipment Noise: ≤69dB (measured at 1m in front of the door)
Standard Configuration: 1 electrothermal film glass observation window, 2 cable holes (Φ100), 2 sample racks, 1 light fixture, 4 casters, 1 sample power control terminal.
Executive Standards
GB/T5170.2-2008 Temperature Test Equipment
GB/T5170.5-2008 Damp Heat Test Equipment (C)
GB/T2423.1-2008 (EC68-2-1) Test A: Low Temperature Test Method
GB/T2423.2-2008 (EC68-2-2) Test B: High Temperature Test Method
GB/T2423.3-2006 (EC68-2-3) Test Ca: Constant Damp Heat Test (C)
GB/T2423.4-2008 (EC68-2-30) Test Db: Alternating Humidity Test (C)
GJB150.3A-2009 (MIL-STD-810F-2000): High Temperature Test
GJB150.4A-2009 (MIL-STD-810F-2000): Low Temperature Test
GJB150.9A-2009 (MIL-STD-810F-2000): Damp Heat Test (Figure 1, Figure 2) (C)
| Model | MiniC/T64 | MiniC/T180 | MiniBT64 | |||||||
| -20A/W | -40A/W | -70A/W | -20A/W | -40A/W | -70A/W | -20A/W | -40A/W | -70A/W | ||
| Inner Volume(L) | 64 | 180 | 64 | |||||||
| Inner dimension | Metal Transfer Stickers Gold Foil Paper Label, Metal Transfer Stickers,Gold Transfer Sticker,Gold Foil Transfer, Custom Gold transfer sticker ZZ Sticker , https://www.zzsticker.com | |||||||||