Soil moisture vertical change depends on soil moisture meter

Soil moisture vertical change depends on soil moisture meter

In this paper, we mainly analyze the changes of soil moisture on Xifeng Loess Plateau. The instrument used mainly for experiments is a soil moisture analyzer for measuring soil moisture.

In the 7 years from 1989 to 2006, statistics were obtained on the 8th of each month from November to November. Has a certain degree of credibility. From the measured data, we can conclude that from the point of view of time change, the soil moisture content continues to decrease from March to July, the soil moisture reaches the minimum value, and the soil moisture content begins in late July. Continued to increase. The center of maximum water content appeared at the depth of 20~30cm in March, and the maximum value of the center was 24mm. Afterwards, the soil moisture showed a decreasing trend both in time and depth. From the end of May to mid-June, it appeared at the depth of 30~60cm. The lowest value of soil water content was 13.2mm; in the late June-early July, 120-160cm and 180-200 depths, the lowest soil water content occurred. From late June, the upper layer of soil moisture showed a significant increase, and the lower layer of moisture changed slowly. From August to September, a region with a large water content centered at a depth of 21.6mm appeared at a depth of 20 to 40cm. In the following 10-11 months, the upper soil moisture decreased, and the deep soil moisture content increased. For different depths, the vertical variation of soil water content is 0-50cm, which is the most drastic change. The soil moisture changes slowly at 50-100cm depth, which is a slowly changing layer. The soil moisture content below 100cm is relatively stable and is a stable layer.

According to the water characteristics of the Xifeng Loess Plateau, we found that the area is very suitable for planting winter wheat. Soil moisture has great influence on winter wheat according to different depths and periods. Obviously, soil moisture is the biggest factor affecting winter wheat, and it is also the focus of this paper. Soil moisture analyzer is a special instrument for measuring soil moisture. In addition, portable soil moisture temperature measuring instrument can measure soil moisture, but it can also measure soil temperature while measuring soil moisture. Portable soil moisture temperature speedometer is a multi-parameter measuring instrument. The soil moisture analyzer produced by Top Instrument also carries a GPS positioning function and can display the latitude and longitude of the current measured point while measuring soil moisture. Because of this function, we can make spatial differences in soil moisture at different locations.

Non Cracked Overlay Plate

HP Non Cracked Overlay Plate is a ground, non-stick surface produced to minimize or eliminate material adhering to the surface.

The low coefficient of friction allows for reduced sticking or carryback in a variety of application such as chutes, hoppers, and mobile equipment and truck box liners.

Besides this grade plate, HP Wear Resistant Group offers various products of wear plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates, Tungsten Carbide Coated Plates in various grade and multiple size options. Composite Wear Plate is a bi-metal plate consisting of a low carbon or alloyed steel base plate and a layer of wear resistant deposit.

The low carbon steel base plate enables the plate to be welded, bolted or studded to existing structures, while the hard facing provides the premier wear-resistant surface capable of working in all applicable service conditions at either ambient or elevated temperatures.

Due to its excellent properties, HP Wear Plates work for long-lasting service life and superb performance, which are well applied to the industries like Cement Plant, Steel Mill, Mining Site, Power Generation, Construction, etc-anywhere need combat with abrasion.

Industrial Applications

Mining, Cement and Brick

Dozer Moldboards. Shovel Liners. Chute Liners. Dragline Buckets. Classifier Screens. Mine and Quarry Skips. Pug Mill Paddles. Compactor Rollers. Bucket Lips. Dipper Buckets. Ore Cars. Ore Scrapers. Dump Truck Body Beds. Loaders and High Lifts. Skid Plates.

Steel Mills

Blast Furnace. Coke Oven and Sinter Plants. Skip Car Liners. Sinter Breakers. Ore Bucket Liners. Receiving Hoppers. Grizzly Bars. Feeder Bins. Conveyor Buckets. Chutes. Spiked Roll Crushers.

Power Plants

Pulveriser Mills. Cyclones. Receiving Hoppers. Liner Plates. Coal Handling Systems. Coal Buckets. Conveyors. Fan Blades and Housings.

General Industry

Grain Chutes. Rub Bars for Conveyor Chains. Agitator Paddles. Dredge Pump Liners. Grit Blast Liners. Centrifugal Pump Liners. Mower Skid Plates.

The mechanically strong interface between the alloy and steel backing is clearly depicted in this cross sectional photograph of Wear Plate.

Non Cracked Overlay Plate (1)

Non Cracked Overlay Plate (2)

Non Cracked Overlay Plate, Smooth Hardfacing Wear Plate, Cement Vertial Mill Wear Plate, Composite Wear Plate

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com