Product highlights
* Linux operation system
* ARM CPU
* Digital signal and processor
* Continous hard work for 10000 hours
* Energy saving design
* High penetration
* Good quality images
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
| Physical Specifications | Â |
| Unit weight (kgs) | 250 |
| Unit size (mm) | 1660(L)*746(W)*1165(H) |
| after packed in wooden pallet -Â | Â |
| Gross weight (kgs) | 320 |
| Packing size | 180*88*138cm |
| Â | |
| General Specifications | Â |
| Tunnel size(mm) | 503(L)*301(W) |
| Conveyor Speed(m/s) | 0.22 |
| Conveyor height(mm)Â | 668.5 |
| Conveyor Max Load(kgs) | 60 |
| X ray dose per each inspection | Typical 3.0 μGy, guarantee 3.5 μGy |
| X ray leakage | Typical 2.0 μGy/h, guarantee 2.5 μGy/h |
| Penetration | Typical 6mm, guarantee 4mm |
| Wire Resolution | Typical AWG38, guarantee AWG36 |
| Penetration Resolution | Typical AWG34, guarantee AWG32 |
| Spatial resolution: | Typical dia1.3mm,Vertical: dia1.3mm; Guarantee dia1.6mm,Vertical: dia1.6mm; |
| Power Consumption | 0.5KVA |
| Noise | < 60 dB |
| Film Safety | Guarantee ASA/ISO1600 Film |
| Â | Â |
| X-ray Generator (single) | Â |
| Anode Voltage | 80 KV |
| Anode power | 0.3mA |
| Generate angle | 80 degree upward |
| Generate direct | from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100%Â |
| Brand | made by ourself |
| Â | Â |
| Software System | Â |
| Self-test after power on | Self test after power-on, and show the problem ( 1. emergency stop, 2. housing panel is open 3. calibration fail  4. detection system error 5. hard drive is missing) |
| Image Display | High resolution of 1024 * 1280 pixel; |
| Image Enhancement | Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall | 30 images recallable, retrieval |
| Image Archive | Up to 500,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Real-time Curve | Real-time curve to see if the detection system and other components work well |
| Others | Fault diagnosis, system time setting, detection blind dots delete, x-ray source setting(analoge or digital), alarm setting, images setting, software register, user management, TIP report, data setting(machine working time, x-ray source working time, baggage counter, etc.) |
| Â | Â |
| Operating Environment | Â |
| Operation temperature/Humidity | 5ºC-40ºC / 0%-90%(non-condensing) |
| Storage Temperature/Humidity |  -40ºCto 70ºC / 5%-95%(non-condensing) |
| Operation Power |  220VAC(±10%) 50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| Â | Â |
| Computer and other | Â |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Hard Disk | SEAGATE 500G 3.5" |
| CPU | Cortex A9 |
| Storage | 1GB |
| Main board | IMX6_mainboard-V030, made by Safeway |
Safeway System -
Â
We're the original supplier and can provide you
factory price, with best quality
Â
Safeway Inspection System Limited.Â
Address:Â Room 308, E Building, QiFeng Digital Park, BaiNiKeng, PingHu Street,
LongGang District, Shenzhen, China, 518108
Tel:Â 0755-89342235Â
Fax:Â 0755-89342650
Mobile: +86-136 7021 3490
Website:Â www.safeway-system.com
To be the best manufacturer of cargo and vehicle inspection system
Product highlights
* Linux operation system
* ARM CPU
* Digital signal and processor
* Continous hard work for 10000 hours
* Energy saving design
* High penetration
* Good quality images
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
| Physical Specifications | Â |
| Unit weight (kgs) | 250 |
| Unit size (mm) | 1660(L)*746(W)*1165(H) |
| after packed in wooden pallet -Â | Â |
| Gross weight (kgs) | 320 |
| Packing size | 180*88*138cm |
| Â | |
| General Specifications | Â |
| Tunnel size(mm) | 503(L)*301(W) |
| Conveyor Speed(m/s) | 0.22 |
| Conveyor height(mm)Â | 668.5 |
| Conveyor Max Load(kgs) | 60 |
| X ray dose per each inspection | Typical 3.0 μGy, guarantee 3.5 μGy |
| X ray leakage | Typical 2.0 μGy/h, guarantee 2.5 μGy/h |
| Penetration | Typical 6mm, guarantee 4mm |
| Wire Resolution | Typical AWG38, guarantee AWG36 |
| Penetration Resolution | Typical AWG34, guarantee AWG32 |
| Spatial resolution: | Typical dia1.3mm,Vertical: dia1.3mm; Guarantee dia1.6mm,Vertical: dia1.6mm; |
| Power Consumption | 0.5KVA |
| Noise | < 60 dB |
| Film Safety | Guarantee ASA/ISO1600 Film |
| Â | Â |
| X-ray Generator (single) | Â |
| Anode Voltage | 80 KV |
| Anode power | 0.3mA |
| Generate angle | 80 degree upward |
| Generate direct | from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100%Â |
| Brand | made by ourself |
| Â | Â |
| Software System | Â |
| Self-test after power on | Self test after power-on, and show the problem ( 1. emergency stop, 2. housing panel is open 3. calibration fail  4. detection system error 5. hard drive is missing) |
| Image Display | High resolution of 1024 * 1280 pixel; |
| Image Enhancement | Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall | 30 images recallable, retrieval |
| Image Archive | Up to 500,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Real-time Curve | Real-time curve to see if the detection system and other components work well |
| Others | Fault diagnosis, system time setting, detection blind dots delete, x-ray source setting(analoge or digital), alarm setting, images setting, software register, user management, TIP report, data setting(machine working time, x-ray source working time, baggage counter, etc.) |
| Â | Â |
| Operating Environment | Â |
| Operation temperature/Humidity | 5ºC-40ºC / 0%-90%(non-condensing) |
| Storage Temperature/Humidity |  -40ºCto 70ºC / 5%-95%(non-condensing) |
| Operation Power |  220VAC(±10%) 50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| Â | Â |
| Computer and other | Â |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Hard Disk | SEAGATE 500G 3.5" |
| CPU | Cortex A9 |
| Storage | 1GB |
| Main board | IMX6_mainboard-V030, made by Safeway |
Safeway System -
Â
We're the original supplier and can provide you
factory price, with best quality
Â
Safeway Inspection System Limited.Â
Address:Â Room 308, E Building, QiFeng Digital Park, BaiNiKeng, PingHu Street,
LongGang District, Shenzhen, China, 518108
Tel:Â 0755-89342235Â
Fax:Â 0755-89342650
Mobile: +86-136 7021 3490
Website:Â www.safeway-system.com
To be the best manufacturer of cargo and vehicle inspection system
High Speed CNC Drilling Machine for Plate
1.1 This machine aims to drilling holes on the metal plate of building steel structure, power iron tower and petrochemical equipments. It adopts gantry type structure. The axis X, Y and Z are drove by servo motor through precise ball guide screw. It positions automatically, precisely and quickly and finishes the processing of drilling automatically. Therefore, it highly improves the precision and speed. Meanwhile, it avoids repairing and scraping caused by manual position or drilling error.
1.2 The control system of this machine adopts host computer and PLC control system. The computer is installed with automatic programming software and machine monitoring software, which can convert the AUTOCAD graph file to processing program directly. It also very fast and easy, even programs it manually. The new operator without experiences of operating computer can program it in short time.
1.3 Automatic chip removal and circulation cooling system reduce the nonproductive time and labor intensity. The operator only need to load and unload work piece and change the drills.
1.4 The advanced CNC drilling power heads can automatically adjust to optimizing feeding speed and rotational speed through computer control according to different diameter of holes. This machine use Taiwan made BT50 spindle, inner cooling type, high accuracy spindle. It can use carbide drill. Machine also adopts pneumatic play knife cylinder, to make tool change more easier. The big power main spindle motor is driven by servo synchronization belt. Thus is can bear big scope of rotation speed.
1.5 This CNC Drilling Machine is designed according to the work piece features and precision requirements; it has compact form and is flexible, it meets the processing requirements better. No matter the holes are arranged as circle or straight line, it can finish the work quickly and accurately. Therefore, this machine is cost-effective choice.
The Work Table
Work table, 12 movable hydraulic clamps
The Drilling Head (BT50 Drilling Spindle)
ATC Automatic Tool Change (8 pics tools)
Drilling-- High speed drilling and high precision, then the production efficiency is very high. For example, how much time drill one hole, if the hole diameter is φ40, thickness is 40mm, you set the drill speed 1800 rpm, cutting speed 0.2mm/r, then the feeding speed is 1800x0.2=360mm/min, drill one hole just need 40÷360≈0.11min (that drill one hole just need 6.6s).
Inner-cooler
Work piece location:
Make decision of using half of work
platform or the whole according to the size of processing work-pieces. Using
the whole platform, the work-piece should be put on the processing position
close to the clamping cylinder locating side, step two pedal switches, clamp
the work-piece and start processing. Using half of work platform, the work-piece
should be put on the front or back processing position close to the clamping
cylinder locating side, step the corresponding pedal switch and start
processing.
Rotating speed setting:
Rolling speed can be set according to diameter of dill and other
relevant information. The program will calculate out the rotation speed
automatically according to the dill bits diameter and cutting speed.
Feeding speed
setting:
Feeding speed can be set according to
drilling manual or experiences. The speed of this machine has been set
according to the diameter of drill bit. Users can adjust it flexibly
according to the actual use. For specific adjustment method, please refer to
computer programming instruction.
Self-running operation:
When all factors meet the condition which self-running need, the
"Ready" indicator light on. Put "start" button, the
machine will run automatically and process work-pieces meeting requirement.
Notice:
This machine has two platforms. When one is
processing, the other can be mounting and dismounting. The clamping and
loosing of work-pieces is controlled by pedal switch.
It will realize
continuous processing, improve efficiency and save time.
Packing & Delivery
Packing Details : Packing, this model need 1*20GP;
Delivery Details : 30-50 days after get the first payment.
1. Special logistics packaging
2. Suitable carton size
3. Fasten
4. Professional placement
5. Professional shock
6. Complete package
Our Certifications
SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.
QUALITY MAKE BRAND, HONESTY WIN MARKET!
INNOVATION PROMOTE DEVELOPMENT, HARMONY CONVERGE TALENTS.
THANKS FOR ALL CUSTOMERS BELIEVE AND CHOOSE SUNRISE CNC.Plate Drilling Machine,Plates Drilling Machine,CNC Drilling Machine,CNC Metal Plate Drilling Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com