Â Â Â Â The CURTIS 1230 motor controller is an AC induction motor speed controller designed for use in a variety of material handling vehicles. Typical applications include walkie/rider pallet trucks, low lifts, stackers, sweeper/scrubber machines, and other small industrial vehicles. This high performance programmable controller is simple to install, efficient, and cost effective.
Â Â Â Â Â The 1230 controller offers smooth precise control of motor speed and torque. When used with hydraulic systems, the 1230 turns the pump motor on and off and also controls valves on the hydraulic line-thus controlling the hydraulic path for Lift and Lower operations. These controllers are fully programmable through theÂ CURTIS ModelÂ 1313-4331 Handheld ProgrammerÂ orÂ 1314 PC Programming Station. The programmer provides diagnostic and test capability in addition to configuration flexibility. The 1230 is also designed to work with the optionalÂ CURTIS 840 Spyglass data displayÂ and the optional CURTIS 1312 tiller multiplexer.
- CURTIS Model: 1230-2402
- Operating voltage range: 16 to 32 V
- Nominal input voltage: 24 V
- 2 Minute Current Rating (amps): 200
- 1 Hour Current Rating (amps): 80
- MOSFET overtemperature cutback: linear cutback starts at 100Â°C; complete cutoff at 110Â°C
- MOSFET undertemperature cutback: approx. 50% motor current at -25Â°C; complete cutoff at -40Â°C
- Throttle Type: 0-5K Î© (default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kÎ©-0, 0-5kÎ©, 0-5V, etc.
- Ambient Operating Temperature Range: -40Â°C to 50Â°C
- Package environmental rating: IP53
- Dimensions: L164xW146xH56 mm
- Net Weight: 1.1 kg
- EMC emissions: EN50081-2/08.93
- EMC immunity: EN50082-2: 1995
- Safety, uncontrolled runaway: EN1175
- 60-200 amp AC induction motor controller
- MultiModeâ„¢ feature allows two distinct user-selectable operation modes
- Easily programmable through theÂ CURTIS ModelÂ 1313-4331 Handheld ProgrammerÂ orÂ 1314 PC Programming Station
- Complete diagnostics through the programming devices and through the controller's built-in Status LED
- Throttle input for single-ended or wigwag 5kÎ© pots or 0-5V throttles (both standard full stroke and restricted range)
- Active precharge of controller capacitor bank extends life of main contactor tips
- Two hourmeters - total KSI-on hours and drive hours - and their associated maintenance timers are built into the controller, with EEPROM storage (no battery)
- BDI calculations performed within controller
- Meets EEC fault detection requirements
- Fault detection circuitry on throttle inputs can be used to inhibit operation if throttle signal goes out of range for any reason (applies both to the traction throttle and, in applications that include a proportional valve, to the hydraulic throttle as well)
- Stall protection
- Internal reverse polarity protection (no external diode required)
- Continuous diagnostics during operation, with microprocessor power-on self-test
- All output drivers are short-circuit protected and provide built-in coil spike protection
- Positive battery connections for all inputs
- Fully protected inputs
- Internal and external watchdog circuits ensure proper software operation
- High environmental protection rating (IP53)
- 3-wire serial interface for multifunction display
Â HefeiÂ HuanxinÂ TechnologyÂ DevelopmentÂ Â Co.,Â Ltd.Â hasÂ beenÂ devotingÂ ourselvesÂ toÂ developingÂ andÂ manufacturingÂ andÂ otherÂ sinceÂ 2004.Â WeÂ areÂ locatedÂ inÂ Hefei,Â AnhuiÂ Province,Â withÂ convenientÂ transportationÂ access.Â WeÂ employÂ overÂ 101Â -Â 200Â PeopleÂ staffÂ members.Â WeÂ haveÂ achievedÂ greatÂ improvementÂ sinceÂ ourÂ companyÂ wasÂ foundedÂ inÂ 2004.Â WeÂ abideÂ byÂ theÂ mottoÂ ofÂ FirstclassÂ quality,Â ReasonableÂ price,Â BestÂ serviceÂ andÂ ProfessionalÂ productÂ support.Â
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%.
Package and ShippingÂ
Package:Normally we use the standard exporting packaging. We also can according to clients' request .
1.Â ByÂ Couriers:Â DHL,Â UPS,Â FEDEX,Â TNTÂ areÂ theÂ mainÂ courierÂ companiesÂ weÂ areÂ cooperating.
2.Â ByÂ Air:Â DeliveryÂ fromÂ theÂ ShanghaiÂ airportÂ toÂ customer'sÂ destinationÂ cityÂ airÂ port.
3.Â ByÂ Sea:Â DeliveryÂ fromÂ theÂ ShanghaiÂ seaÂ portÂ .
Radar Level Meter,Digital Pulse Radar Level Meter,Radar Lpg Level Meter,Pulse Radar Level Meter
Pioneer(Dalian)Automation Instrument Co.,Ltd , https://www.pioneerinstrument.com