- Model NO.: 0.6-7m3
- Customized: Customized
- Composition: Sterilization Equipment
- Process: Frozen and Chilled
- Material: Stainless Steel
- Package: Plywood Case
- Transport Package: Standard Wooden Case
- Origin: Zhejiang, China
- Condition: New
- Voltage: 220V
- Processing Material: Natural Ingredients
- Heating Way: Steam
- Handling Capacity: 400-4600L
- Trademark: HH
- Specification: National Standard
- HS Code: 8419899090
Advantages:
1. Water Spray
2. Energy Saving
3. Fully automatic or semi-automatic system
4. Uniform heat distribution, no dead angle
Breif Introduction:
It's suited as the two-stage sterilization equipment of bag-packing or case-packing food. It is composed of technology tank, hot water, cold water tank, heat exchanger, all kinds of pump valve, connection pipe and semi-automation control system. The soft water inside the tank keeps on spraying fan-shaped and belt-shaped hot water which pose a wave-like motion to the being sterilized after it goes through the heat exchanger or after it cools off. The heat diffusion is rapid and well distributed. It can reduce the possibility that the packed goods are not artistic because of the influence of the outside water quality.
Characteristics of Autoclave
1. Semi automatic computer control the temperature, sterilization time, pressure protection, product cooling
2. Energy saving and easy to operate.
3. It can use hot water cycle sterilization and steam sterilization.
4. It is suitable for vacuum package, cans, glass bottles, and plastic package, edible and other food.
5. Setting several sterilization processes according to different products.
| Model | RJD-500 | RJD-700 | RJD-900 | RJD-1000 | RJD-1100 | RJD-1200 | RJD-1300 | RJD-1500 | |
| Sterilizing Tank | ID (mm) | 500 | 700 | 900 | 1000 | 1100 | 1200 | 1300 | 1500 |
| Height (mm) | 800 | 1200 | 1500 | 2000 | 2400 | 3000 | 3750 | 3750 | |
| Volume of the Inside Tank (m3) | 0.2 | 0.5 | 1 | 1.8 | 2.5 | 3.5 | 5.2 | 7 | |
| Sterilizing Baskets | 1 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | |
| Steam Consumption kg/cycle | 85 | 150 | 250 | 285 | 350 | 385 | 420 | 500 | |
| Design Temperature (C) | 147 | ||||||||
| Design Pressure (Mpa) | 0.35 | ||||||||
| Steam Work Pressure (Mpa) | 0.4-0.6 | ||||||||
| Cooling Water Work Pressure (MPa) | 0.3 | ||||||||
| Compressed Air Work Pressure (Mpa) | 0.7 | ||||||||
| Outside Sizes | L (mm) | 1150 | 1650 | 2050 | 2600 | 3050 | 3700 | 4500 | 5650 |
| W (mm) | 750 | 950 | 1150 | 1250 | 1350 | 1450 | 1550 | 1750 | |
| H (mm) | 1000 | 1200 | 1400 | 1500 | 1600 | 1700 | 1800 | 2050 | |
A press brake is a piece of manufacturing equipment that is used to bend sheet metal. A press brake is typically narrow and long so that large pieces of sheet metal can be bent by it. A press brake bends sheet metal by lowering a punch onto sheet metal that has been positioned on top of a die. The metal may be bent several times by a press brake until the desired form has been achieved.
Press brakes can make a variety of different bends on many different types of metals. When setting up a bending process, it is important to consider the metal type being bent, the die, the punch, and the bending force.
The metal type is important to understand because of the differing physical properties among metals. For instance, a high carbon steel will generally be less bendable by a press brake than many aluminum alloys because of the differences in ductility and strength. Metals typically have a recommended minimum bend radius that the material can be bent to without damaging it.
The die and the punch used on the press brake both have a large impact on the bending process. The die is hollow material that the metal is placed on top of prior to bending. It is a very hard and strong material that is near in shape to the desired shape of the metal being bent. The punch is a solid material that is lowered down onto the metal. Since the pressing action of the punch onto the metal and the die are what causes the metal to bend, both shapes must be accurately suited to the bending job. The correct metal shape following a press brake operation is dependent on the size and shape of the punches and dies. The dies and the punches are typically designed in such a way that they can be interchanged easily to accommodate a wide array of jobs.
Press Brake,Cnc Press Brake,Metal Bending Machine,Hydraulic Press Brake
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com