DC 12V Car Tire Air Pump Household Electric Car Inflator

  • Model NO.: MSAP2518
  • Exhauster Method: Motor
  • Work Function: Inflator
  • Trademark: Marshine
  • Specification: CE
  • Oil or Not: Oil Free
  • Vacuum Degree: High Vacuum
  • Working Conditions: Dry
  • Transport Package: Neutral Package
  • Origin: Ningbo Zhejiang

Feature:

1. Maximum pressure up to 250psi

2. Use automobile cigar lighter power, inflatable fast

3. Small volume

4. There are pressure indicator, can accurately measure the tire pressure

5. Shell sturdy and durable

6. Packaging compact, easy to carry
 

Technical Parameter:

Max pressure 250/300Psi
Electric current Unloaded 10A
  Load 6A
wire lenth 2.8m
Pipe lenth 45cm
inflation time 8min~10min
Max flow 25L/min

Size:17.5cm*6.5cm*17.5cm

DC 12V Car Tire Air Pump Household Electric Car Inflator

Image Display

DC 12V Car Tire Air Pump Household Electric Car InflatorDC 12V Car Tire Air Pump Household Electric Car InflatorDC 12V Car Tire Air Pump Household Electric Car Inflator

Precaution:

1.When used, please start the car engine to enhance power. won't consume the vehicle's battery power

2.Use only the DC power supply (DC12V 10A), do not use household high-voltage power supply

3.Inflated, please rest after ten minutes operation, which could prolong motor life. Inflatable rubber boat in time to give, continuous operation is thirty minutes

4. Under normal circumstances, three to six minutes it can reach the normal tire pressure 220kp. If you inflate a large tire, then the time will be a little longer. If when the inflatable beginning, the meter pointer rapid increase, indicating that no air charge into the tire, it must be stopped,then re-operation. Otherwise, the instrument and the motor will be damaged.

5. When used, please do not leave. Pay attention to tire pressure, gas can not charge too much

6. Make sure the cigarette lighter good conductivity. Otherwise, it will blow the fuse, so that inflator can not function properly

7. The machine should avoid damp, heavy fall, immersed in sand to avoid receiving damage

8. This machine has a large start current, do not turn on the power switch when connected to the tire, otherwise, it is possible to damage the fuse because the starting current is too large.

Metal & Mold CNC Router

Jinan Upgoal Mechanical Equipment Co.,Ltd , https://www.upgoalcutter.com