Cpm Electric Start Water Pump

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. They are extremely reliable, simple to use, quite and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-sized surge tanks, transferring water, watering gardens, etc.

Cast iron pump body
Stainless steel mechanical seal(graphite to ceramic)
Brass impeller
Protection IP44
Anti-rust shaft(Hi-Cr plated 45# steel shaft)
With thermal overload protector in single phase motor
C&U bearing or local bearing
AUTOCPM

Application :
CPM series are single stage centrifugal pumps, suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluide. The hydraulic characteristic is with higher head and smaller capacity.
 
Operating conditions:
Liquid temperature up to 60
Ambient temper up to 40
Total suction lift to 9m
Continuous duty

Construct:
Pump body: Cast Iron 
Impeller: Brass    
Mechanical seal: Stainless steel/Carbon-ceramic   
Motor: Closed, externally ventilated
Insulation class: B and F    
Protection class: IP44 or IP54  
Shaft: 45# Steel / Stainless steel   
Thermal protector (if required) 
 
Technical data(220-240V/50HZ)
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. They are extremely reliable, simple to use, quite and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-sized surge tanks, transferring water, watering gardens, etc.

Cast iron pump body
Stainless steel mechanical seal(graphite to ceramic)
Brass impeller
Protection IP44
Anti-rust shaft(Hi-Cr plated 45# steel shaft)
With thermal overload protector in single phase motor
C&U bearing or local bearing
AUTOCPM

Application :
CPM series are single stage centrifugal pumps, suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluide. The hydraulic characteristic is with higher head and smaller capacity.
 
Operating conditions:
Liquid temperature up to 60
Ambient temper up to 40
Total suction lift to 9m
Continuous duty

Construct:
Pump body: Cast Iron 
Impeller: Brass    
Mechanical seal: Stainless steel/Carbon-ceramic   
Motor: Closed, externally ventilated
Insulation class: B and F    
Protection class: IP44 or IP54  
Shaft: 45# Steel / Stainless steel   
Thermal protector (if required) 
 
Technical data(220-240V/50HZ)

Crane Electrical Control Panel

We provide customers with the electrical cabinet, electric switchgear, and complete sets of electrical control panels as well as site installation and commissioning services. Meanwhile, we offer to redesign or remanufacture non-standard electrical control cabinet received from customers.

Consumers understand the importance of efficiency and reliability.That is why we become the preferred choice for electrical control cabinet,

Which can be tailored to specific applications. Via a fast, effectivce after-sales service including informative technical support, we keep creating greater value for customers.

Advantages

Professional design suits your various needs.

Compact breaker design is safe and easy to use.

The innovative drawer design complies with ergonomic requirements.

Compact breaker design offers safe and convenient operation.

Pull-out drawer design complies with the ergonomics requirements. It is safe and flexible.

This electrical control cabinet is fixed to the ground. It is safe to use while allowing modifications.

Mains can enter the enclosure either from the top or behind.

Technical Features

Three interchangeable Cable entry gland plates are installed onto the bottom of our electrical control cabinet. On the gland plate, there are punched openings, or knockouts that can be removed to accommodate cables.

Along the drawer slide, the mounting plate is pushed into the cabinet.

Insulation back plate is bolted to the cabinet. Or as an alternative, buyers can require a back door.

Applications

Mechanical engineering, electrical engineering, nuclear power, ferrous metallurgy, storage and logistics, textile printing, and wind power industries.

Crane Electrical Control Panel

Crane Electrical Control Panel,Crane Electrical Cabinet,Crane Electrical Control Cabinet,Electrical Control Cabinet Panel

Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com